SENIOR AND JUNIOR MODEL 5
GAS CONTROLLER

Available in two or four valve configurations. Independent control of two injection-molding machines.  Stores up to 32-process recipe files.  Selectable system pressure up to 8,500 psi.  Equipment maintenance and process help screens for operator reference.  Controls up to 8-hydraulic outputs.  Eight selectable language options including Spanish and Chinese.
Spec Sheet

SENIOR AND JUNIOR ADVANTAGE
GAS CONTROLLER

Available in two or four valve configurations. Independent control of two injection-molding machines.  Stores up to 6-process recipe files.  Selectable system pressure up to 7,500 psi.  Up to 6-presets for profiling time and pressure.  Controls up to 4-hydraulic outputs. 

Spec Sheet

"LCS" JUNIOR GAS CONTROLLER
Available in one or two valve configurations. Up to 5-presets for profiling time and pressure. Very low cost and compact design.  Valves operated via a portable handset.  

Spec Sheet

SENIOR AND JUNIOR SINGLE VALVE GAS CONTROLLER

Available in Single-Valve configuration.  Very low cost design.  Injects gas at a single pressure for a single amount of time. 

Spec Sheet

PRESSURE SWING ADSORPTION NITROGEN
GENERATION SYSTEMS

Available in output flow rates of 10 to 35 SCFM.  Utilizes Pressure Swing Adsorption (PSA) technology to extract the nitrogen from a compressed air source for greater efficiency and lower maintenance costs versus a membrane type system.  Capable of producing nitrogen purity levels to 99.99%.  

Spec Sheet

NITROGEN
COMPRESSOR SYSTEMS

Available in output flow rates of 10 to 35 SCFM at 5,000 psi.  All models utilize a Sauer-brand electric, 3 or 4-stage, air-cooled, reciprocating piston type compressor.  Motors are directly coupled (i.e. no belt drive).  Low service intervals of between 2,000 and 2,500 hours.       

Spec Sheet

AUTOMATIC SHUTOFF NOZZLE

Compact and economical.

It's simplified design requires no hydraulics or pneumatics to operate.

Spec Sheet

STATIONARY SELF VENTING GAS PIN

Indispensable tool for gas assist injection molding, it is easily installed in new or existing molds. Its unique design prevents plugging and allows in-mold gas injection and venting.
Spec Sheet

HYDRAULIC POWER

Eight zone portable hydraulic power package. Interfaces directly with the Model 5 and Advantage units to control the function of Gas Pins and Overspill Pins.