Ask a Gas Assist Injection Molding Expert

So that we can respond effectively to your inquiry, the following information will be needed:

1.) Physical description of your part[s] and engineering drawings if possible
2.) Material currently being used

We may furnish technical advice or assistance as it deems to be appropriate in reference to your use of our products. It is expressly understood and agreed that since all some technical advice or assistance may be rendered without compensation and is based upon information believed to be reliable, the customer assumes and hereby expressly releases Gain technologies Inc. from all liability and obligation for any advice or assistance given or results obtained. Moreover, it is your responsibility to conduct end-use testing and to otherwise determine to your own satisfaction whether Gain Technologies Inc. products and information are suitable for your intended uses and applications.

Top of Page